Twenty zone repeater panel

The Twenty zone repeater panel is part of the Context Plus FP Range Conventional Panels - 1 to 14 Zone range from Context Plus, supplied and supported by SPS. The FF398-2 is a 20 zone Repeater Panel that displays the zone(s) from which a fire condition has been initiated by illumination of a steady red light(s). When the alarm sounders are silenced at the main control panel the zone light(s) on the Repeater Panel are extinguished, and the Fault light is illuminated.

Specifications & features

• The FF398-2 is a 20 zone Repeater Panel that displays the zone(s) from which a fire condition has been initiated by illumination of a steady red light(s).
• When the alarm sounders are silenced at the main control panel the zone light(s) on the Repeater Panel are extinguished, and the Fault light is illuminated.
• This state is maintained until the main control panel is Reset or other Zones are triggered.
• The Fault light is also illuminated in the case of a Lamp Test or fault condition at the main control panel.
• The nature of the fault is not indicated and must be determined at the Main Control Panel.
• When mains power to the whole Fire Alarm system is correct then a green Mains On light is illuminated.
• The Repeater Panel has an integral fault sounder which mimics the Main Control Panel fault sounder and thus can be muted from the main control panel.
• There is provision for locally testing the Repeater panel lights & fault buzzer via the "Test Lamps" button on the front of the Panel.
• The FF398-2 Repeater Panel is designed solely for use with the Context Plus Conventional FP range of fire control panels.
• It consists of the wall mounted Repeater Panel which contains two 10 zone receiver circuit board and two Transmitter Board which are mounted in the main fire control panel unit.